How to replace the timing chain and Variable Timing Sprocket on Nissan Titan?

The timing chain procedure for such engines is complex, which cannot be easily performed by a home mechanic; however, the following steps should be done-marking all the removed parts, noting the length and place of various bolts, and taking an instant or a digital picture for references. This is a process that needs the engine to be extracted from the car and having the suitable apparatus and equipment. Timing is rather delicate, and even the simplest of mistakes can lead to extensive engine damage The task should only be carried out by highly experienced personnel and any work done should be thoroughly checked before the engine is started. Start with solving fuel pressure, removal of the top engine cover, and spark plugs with the number 1 piston at the top dead center on the compression stroke. Remove the negative battery cable, pull off the drive belt and idler pulley assembly, evacuate the cooling system and engine oil, and also, release the radiator and cooling fans. Once the engine is removed from the car, make sure that the crankshaft does not rotate while you remove the crankshaft pulley and that number one piston be on the TDC. Loosen the tension from the left timing chain tensioner, remove the left hand timing chain and sprockets then do the same for the right. Look at camshaft and crankshaft sprockets for the signs of wear or looseness, also to ensure that the timing chains are the correct ones check the links and colored marks located around them. Before installing additional components, crankshaft sprockets and camshaft sprockets should be fitted as well as bolts should be tightened in a manner that would stop rotatory motion of camshafts. Position the timing chains to the correct marks, specify the tension guides and the tensioners, and then make sure all the assemblies are in their correct position before removing the holding pins. Screw in the oil pump and the drive spacer and make sure that it fits appropriately; on surfaces where the new O-rings and the RTV sealant will be needed, be sure to wipe them clean. Returning this assembly to truck, fit the timing chain cover, the upper timing chain covers and the crank shaft pulley bolts following the specified pattern. Following overhauling involves; running the engine without starting it to see whether it rotates freely, changing the oil filter, re-attaching the crankcase and cooling system, and running the engine while examining for any leakage.

Genuine Nissan Titan Variable Timing Sprocket

Timing Gear Sprocket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Variable Timing Sprockets found

View related parts
Nissan Titan Sprocket-Camshaft,Intake
Part Number: 13025-ZE00B
$425.51 MSRP: $567.35
You Save: $141.84 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Camshaft Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2015 Nissan Titan | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Sprocket-Camshaft,Intake
Part Number: 13025-ZE00A
$425.51 MSRP: $567.35
You Save: $141.84 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Camshaft Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2015 Nissan Titan | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Sprocket-Camshaft
Part Number: 13024-7S010
$180.60 MSRP: $240.80
You Save: $60.20 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2007 Nissan Titan | LE, SE, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Sprocket-Camshaft
Part Number: 13024-7S000
$180.60 MSRP: $240.80
You Save: $60.20 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2007 Nissan Titan | LE, SE, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan SPROCKET-CAMSHAFT Intake
Part Number: 13025-EZ30B
$251.85 MSRP: $335.80
You Save: $83.95 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket-Camshaft,Intake; Actuator, Camshaft Gear
- Replaces: 13025-1CA1B, 13025-1LA0B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2021 Nissan Titan | PRO-4X, Platinum, Platinum Reserve, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan SPROCKET-CAMSHAFT Exhaust
Part Number: 13025-EZ30D
$236.86 MSRP: $315.82
You Save: $78.96 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket-Camshaft; Actuator, Camshaft Gear
- Replaces: 13025-1CA1D
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2021 Nissan Titan | PRO-4X, Platinum, Platinum Reserve, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan Sprocket-Camshaft,Intake
Part Number: 13025-EZ30A
$241.79 MSRP: $322.38
You Save: $80.59 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Camshaft Gear
- Replaces: 13025-1LA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2021 Nissan Titan | PRO-4X, Platinum, Platinum Reserve, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan SPROCKET-CAMSHAFT Exhaust
Part Number: 13025-EZ30C
$175.85 MSRP: $234.47
You Save: $58.62 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sprocket-Camshaft; Actuator, Camshaft Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2021 Nissan Titan | PRO-4X, Platinum, Platinum Reserve, S, SL, SV, SV/Comf | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan Sprocket-Camshaft
Part Number: 13024-ZE03A
$124.58 MSRP: $166.10
You Save: $41.52 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Gear, Exhaust Gear
- Replaces: 13024-ZE01A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2015 Nissan Titan | LE, Off-Road, PRO-4X, S, SE, SL, SV, XE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Titan Housing Assy-Actuator W/Coupling
Part Number: 23757-EZ30B
$957.58 MSRP: $1276.77
You Save: $319.19 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing Assy-Actuator With Coupling; Actuator
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan Housing Assy-Actuator W/Coupling
Part Number: 23757-EZ30A
$983.79 MSRP: $1311.72
You Save: $327.93 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing Assy-Actuator With Coupling; Actuator
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.6L | VK56VD
View related parts
Nissan Titan Sprocket Assy-Camshaft
Part Number: 13095-EZ40A
$53.44 MSRP: $71.25
You Save: $17.81 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0L Diesel | CEV8D1
View related parts
Nissan Titan Sprocket-Chain Drive
Part Number: 13143-EZ40A
$148.46 MSRP: $197.95
You Save: $49.49 (25%)
Product Specifications
- Other Name: Timing Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Titan | Platinum, PRO-4X, S, SL, SV, SV/Comf | 8 Cyl 5.0L Diesel | CEV8D1

Nissan Titan Variable Timing Sprocket

If you need any OEM Nissan Titan Variable Timing Sprocket, feel free to choose them out of our huge selection of genuine Nissan Titan Variable Timing Sprocket. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Titan Variable Timing Sprocket Parts Questions & Experts Answers

Sprocket-Camshaft
13024-7S010
Q: How to replace the timing chain and Variable Timing Sprocket on Nissan Titan?
A: The timing chain procedure for such engines is complex, which cannot be easily performed by a home mechanic; however, the following steps should be done-marking all the removed parts, noting the length and place of various bolts, and taking an instant or a digital picture for references. This is a process that needs the engine to be extracted from the car and having the suitable apparatus and equipment. Timing is rather delicate, and even the simplest of mistakes can lead to extensive engine damage The task should only be carried out by highly experienced personnel and any work done should be thoroughly checked before the engine is started. Start with solving fuel pressure, removal of the top engine cover, and spark plugs with the number 1 piston at the top dead center on the compression stroke. Remove the negative battery cable, pull off the drive belt and idler pulley assembly, evacuate the cooling system and engine oil, and also, release the radiator and cooling fans. Once the engine is removed from the car, make sure that the crankshaft does not rotate while you remove the Crankshaft Pulley and that number one piston be on the TDC. Loosen the tension from the left timing chain tensioner, remove the left hand timing chain and sprockets then do the same for the right. Look at camshaft and crankshaft sprockets for the signs of wear or looseness, also to ensure that the timing chains are the correct ones check the links and colored marks located around them. Before installing additional components, crankshaft sprockets and camshaft sprockets should be fitted as well as bolts should be tightened in a manner that would stop rotatory motion of camshafts. Position the timing chains to the correct marks, specify the tension guides and the tensioners, and then make sure all the assemblies are in their correct position before removing the holding pins. Screw in the Oil Pump and the drive spacer and make sure that it fits appropriately; on surfaces where the new O-rings and the RTV sealant will be needed, be sure to wipe them clean. Returning this assembly to truck, fit the timing chain cover, the upper timing chain covers and the crank shaft pulley bolts following the specified pattern. Following overhauling involves; running the engine without starting it to see whether it rotates freely, changing the oil filter, re-attaching the crankcase and cooling system, and running the engine while examining for any leakage.

Related Nissan Titan Parts

Browse by Year